Skip to main content

Reply to "has anyone use a Fibersteell plexiglass window"

Cory-

I did this when I had my JPS- I had two sets: one for the soft-top, and one for the hard-top. I made my own pegs out of bar-stock, and strap steel- it allowed me to position the side curtains at whatever angle worked best. Mine angled back on the door tops. Don't be surprised if you have to make more than one of each.

Here's what I did-

First, I bought some edge seal material from McMaster-Carr. Here's a link:

http://www.mcmaster.com/#edge-seals/=628cnp

Then I made a template out of cardboard, after that out of some sort of 1/4" wood product (masonite, luan underlayment, etc.) before I did one in polycarbonate. On mine, I used a sweep seal material for the bottom (door) edge (something like this, but I got it from another source):

http://www.mcmaster.com/#rubber-strips/=628gtj

Once I was happy with the shape of my template, I got my polycarbonate cut at a glass shop, so that the edges would be polished.

If you do it right, they look really, really nice.
×
×
×
×
×