Skip to main content

Reply to "2017 VS Headlight Buckets Not Seating Correctly"

@GomezInSJ posted:

Good Morning,

Thanks for all the advice...I'll be taking everyone's inpit and trying to get them seated correctly this afternoon.

Troy, you mentioned the spring clips possibly being in the way? Would that be at the top of the assembly near the metal tab...or L shaped bracket? Before placing the new buckets on the speedster I made sure the clips were as close to the same position as the old buckets I had removed....but I will doble check.

 

Thanks Again,

David "Gomez"

San Jose, Ca. 95129

 

 

Yes, the clips that hold the lens housing in the ring.  Coincidentally, I replaced both headlights on a Speedster I have today.  The first one popped off the flange that the headlight hangs from as I was tightening the bolt at the bottom.  I just needed to be sure it was firmly hooked on to the flange and I held a little downward pressure on the top of the ring as I screwed in the bolt.  No problem now. 

×
×
×
×
×