Skip to main content

Reply to "74mm 6-bolt Steering wheel column and looking to install a 9 bolt Wheel"

You could always just change the hub out... while 74mm bolt pattern is a very standard Size used for all Nardi wheels, maybe best to start from scratch... and get a new hub that would work with the Grant /3 hole adaptor you already purchased.

ispwest has billet VW hubs for all the various VW beetle year columns.  Below is a sample of hub to fit a 1960-19 74 1/2 year column...

do you know what column you have?  You can tell what column you have by counting the spindles and measuring the diameter of the column at the spindle end...

for example: a beetle 60-74 1/2 column has at the Splines: Diameter: 20mm, Spline Count: 40

https://www.vwispwest.com/GA-9...l?p=c3E9U3RlZXJpbmc=

also worth noting, beetle and bus columns are different.. different diameter and spindle count... confirm what is installed before going down this path.

if you don’t have a caliper in hand to measure diameter/ spacing... harbour  freight always has them on sale for less than 15$.

Last edited by Lfepardo
×
×
×
×
×