Skip to main content

Reply to "Any tips for adjusting spacing of exhaust tips to rear bumper?"

@MarylandGuy

The spacers are basically the same flanges that are welded to the exhaust pipes.  SS flanges that are laser cut to the same shape and ID as the flanges.  He also supplies another set of gaskets to match the flanges.  You will need one on each side of the spacer.

You are correct, it simply pushes the muffler down a small amount.  If I recall correctly, the spacers were about 1/4" thick and moved my tailpipes down about 1/2" from the body.

You could make or buy the spacers, but I don't think they are a standard shape/size and require his gaskets to match.  Check the dimensions on the ones you linked to make sure they match.  The bolts are easy to get.  However, for 60 bucks, his makes for a really clean installation and work great.  Just my opinion.

James

Last edited by James
×
×
×
×
×