Skip to main content

Reply to "Ball joint work...."

The job is done..... The Toyota scissors jack worked per Mango, and I did have to lever the joint stud out of its socket, per Gordon.... None of that was as big a problem as getting the camber eccentric off the joint stud. ( took two ball pien hammers alternately impacting opposite sides with my tie rod sepperator pushing on the stud..Took all of ten min. and a new section in the sailor language dictionary.) The silliest problem were those wire retainers... After playing with those for a while, the brain finaly kicked in with " There is no pressure in there, use some cable ties." All in all an hour and a half...

Anyway, thanks again guys.... The team effort paid off.
×
×
×
×
×