Skip to main content

Reply to "CB Performance vs MOFOCO Engines"

now you are asking a skill testing question;it's been over twenty years ago since I had the motor built. I'll have to do some digging to find the paperwork for specs. . It's a low compression motor  2332,  7.5-1 ,  scat forged crank, 044 heads with 10 or 12 hours of pot/flowbench work,scat 1.5 ratio rockers 48IDF weber carbs. Primo wanted to run a dual ramp Crower cam @ the time but it wasn't available so he used an Engle with some serious specs. but don't remember the lift and duration on the cam or the valve sizes. I've had this motor up to 6500 rpm in third gear a number of times and 6000rpm in forth @ well over 100mph. 

×
×
×
×
×