Skip to main content

Reply to "COVID BOREDOM = SPEEDSTER PURCHASE"

"2) Attempted to put the top up and i'm about an inch away from snapping it in place. Kept it down for now." - @iczer34

Jason, the problem may be the tensioners used to tighten the convertible top once its up.

These are just inside the each door at the bottom of the convertible top bows.

Here is the tensioner in the 'Off' position. Essentially, the levers must be in the 'off' position to allow you to pull the header bow onto the windshield to be attached.image-1

Once you have the header bow attached to the windshield (chrome header-bow latches attached to windshield frame and snapped closed), you pull the tensioner levers up into the (locked) or 'On' position. This will tighten up the fit of the convertible top.

image

Hope you find this info useful. Wishing you many miles of top-down driving enjoyment in your new Speedster.

Attachments

Images (2)
  • image-1
  • image
×
×
×
×
×