Skip to main content

There was an unexpected issue forwarding you to "Twitter" for authentication. Please try again later.
×

Reply to "my DIY Narrowed Rear Training Arms"

Initially a while back I was looking at the 944 for brakes mostly when I was building the car. 

I have come to understand that the 944 rear end offers me no real advantage but when I was having a balancing issue, I wondered if maybe the axles or the hubs being hub centric would give me a chance at a better balanced rear wheels.  

I cured my front end balance issue by getting new tires in April 2019 and the rear were new from 2018 but I still get a small rear vibration sometimes and, well you know the madness got to me and I started looking for hubs again.  I could get some hub centric rings made but I have to have a machine shop do them with my wheels and then they have to fit onto the empi below.  

The issue I have in getting them made is that I have a spacer then the castle nut as well which is actually bigger than the hub center so I have to remove the castle nut and the spacer then have it machined as a metal ring then reverse it ... 

A lot of work so I keep delaying getting it done. 

 

Attachments

Images (1)
  • mceclip0
×
×
×
×
×