Reply to "Emblem placement"

Gordon NicholsMassachusetts 1993 CMC Supporting Member

Maybe.
Is it variable speed?

The preferred method is to use a newly sharpened drill with almost no downforce on it and running at a very low drill speed (150 rpm or so) til you cut gently athrough the gel coat, then speed up a little and slowly cut through the fabric layers. This will minimize cracking or chipping of the gel coat.
Of course, if you use adhesive, this is probably moot.

7/26/203:56 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Premium Membership Required

Supporting Member

Please help keep us running!

Please wait...