Reply to "Fuel filter questions for 2009 Beck Speedster"

DannyP

Having just gone down the EFI route, I have something to say here.

Subaru uses 5/16" or 8mm throughout. According to Jegs or Summit that size line supports up to 400 hp.

Anyway, the pre-pump fuel filter I used is a standard NAPA 3/8" in and out. So I used 3/8" line there, and my MSD pump is 3/8" in and 5/16" out. I used 3/8" BECAUSE the pump inlet is 3/8". At the out of the pump I used 5/16". I used a standard Subaru filter, the round one that they usually install in the engine compartment just before the fuel rail.

In the engine compartment I used AN-6, in the tunnel I used 5/16" Nickel-copper solid lines.

Check out my thread in Spyders/EFI conversion of my Spyder.

4/8/215:58 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Premium Membership Required

Supporting Member

Please help keep us running!

Please wait...