Skip to main content

Reply to "Fuel Injection and Electronic Ignition for VW engines - Speeduino Style"

@dlearl476 posted:

Dang, I just realized I should have snagged a variety of ORings when last I saw him. I had to buy a new set of throttle plate screws when I changed my venturis.

Doesn't the venturi come out the top when you change it? All you need to remove is the carb top IIRC. I did rebuild a set of Dellortos once. I don't remember removing the throttle plate or the throttle shaft.

I do remember Webers have a single set screw for each venturi.

Mike: keep the pics coming, you're teaching me how it's done!

I was thinking of installing a swirl pot though for pressure feed and return from regulator, back in the engine area. Basically use the existing fuel feed and low pressure pump to feed the swirl pot. If not that, then put a return into the top of the fuel tank(probably smarter and simpler). I've always seen the pressure regulator right at the fuel rail, shorter vacuum line that way.

×
×
×
×
×