Skip to main content

Reply to "Fuel Injection and Electronic Ignition for VW engines - Speeduino Style"

Yes. I'm going to attempt to install a 6AN bulkhead fitting on the gas gauge sender. It appears there might be enough room.

If it doesn't fit on the sender, I'll drill a hole next to the sender. I plan to heat and bend a special open-end wrench(Chinese throwaway) to slip in the hole and grab the fitting. I'll put the nut on the outside.

On the inside, I'm using a 6AN to 3/8" tube adapter. I bought some NiCopp fuel lines, they bend SO easy. I'll use about a foot, leaving a 90 at the bottom, directing the return fuel away from the feed port.

I'll be using 5/16" lines for feed and return, and 3/8" in the tank as an attempt to reduce the return flow speed a bit.

All my tube and thread adapters and such are coming from Jeg's. I'm buying hose and clamps from Amazon.

×
×
×
×
×