And.....There is one set of those stacked-up bars for both sides of the front end. The stack-up is inserted into one side of the torsion bar tube and pushed in to slide through a hole in the center anchor ( that moves with the adjuster ) and all the way to the opposite side.
The trick to getting them through the center anchor is to grease them up liberally with regular automotive grease and then put a small rubber band on one end, about an inch from the end, to hold them all in place. Push it in, make it align with the hole in the center and then push it through. The rubber band will just slide along the bars and then be captive in the middle and be harmless.