Be sure not to cross the oil filter housing in and out hoses, there is a check ball valve in it and if the hoses are reversed you get no oil....From experience, I speak
Oh No! I swapped the two lines when I first set up the remote filter. I didn't have the clamps tightened down and it popped a line off of the pump. Very messy learning process. I have drawn 'red' and 'black' arrows on each fitting to make sure the hot is going / flowing properly. Once the oil comes out of the cooler, then everything is flowing through the 'black' or 'cold' fittings.
/fingers crossed that I get it right.
Ted