Reply to "Name that spindle!"

Don’t despair.......   

Just get a disk kit you like that includes the spindles.   You have a ball joint front end, so get a disk conversion for a 1968 or later ball joint front end.  You can buy a “narrow” ball joint “pickle fork” at NAPA (they’ll know what you want) to pop the ball joints free from the spindles, but I usually loosen the nuts, bring a jack up under the nut to lift it a bit, use a hammer to belt down on the trailing arm and the ball joint bolt usually lets go of the trailing arm and is easily removed.  Installing the new spindle is as easy as poking a bolt through a hole and tightening the nut, honest. 

×
×
×
×
×