Skip to main content

Now, I be Cool like Danny P!

I usually check the steering box every couple of years or so when I do my Spring checkup on the car and to loosen/tighten the big 41mm locknut on the front of the box I had been using a plumber's, sink drain, adjustable wrench from the el Cheapo Asian aisle at Home Depot.

It worked, but that's about it and I have always wanted just a big, honkin', 41mm open end wrench (or even an English equivalent) but pricing them out on-line showed them to be $35 bucks or more so I passed.

Until now.......

I found this on Amazon for under $8 bucks!

https://www.amazon.com/gp/prod...00?ie=UTF8&psc=1

It fits without modification (read that "No grinding the heck out of it to make it fit") and it can be used with a 3/8" ratchet or 3/8" foot-long breaker bar.

Now, I am no longer jealous of Danny P and his 41mm steering box wrench.      

IMG_1161

Plus, it fits in my tool chest easier than Danny's  billthecat01

Attachments

Images (2)
  • billthecat01
  • IMG_1161
Last edited by Gordon Nichols
Original Post
×
×
×
×
×