Gordon Nichols posted:I'm running a 2,110 with the later (1971) fan shroud and cooler. I also run a DeRale 16-pass, fan assisted cooler:
http://www.jegs.com/i/Derale/2...gEGKrKt0oaApC88P8HAQ
With the Mocal sandwich plate thermal oil switch and a 180° fan turn-on switch.
The cooler is mounted in the left rear wheel well, right after the oil filter. I am not a big fan of mounting anything over the transaxle as it tends to draw warmed air into the cooling fan inlet. My set-up has been working fine (always under 205° oil temp) for over a decade.
Your method of adding wire mesh over the cooler was a good idea. Simple but effective.