So last Saturday, spent 3 hours doing "chores" for Dad, then spent about 1.5 hr putting the rear torsion springs and 1 trailing arm back on the pan. Had to stop due to time and the fact I couldn't remember which side of the trailing arm the spring plate fits against. I know now and I'll get that done next time... And maybe even hang the front beam. Then I'm going to make a support so I can move the pan around the shop and out from under the hanging body.. I have some casters so it's just a matter of some 2x4's..and time, the one thing that's really in short supply. At least I got something going again.