Thanks Al, Robert and Danny. I'll do some checking tomorrow on your questions. Shocks are KYB Nitrogen, will check model when I get it up off the floor. Car has stock spindles, not lowering ones. My beam is adjustable, I'll post pics. The two center holding nuts are not in the same location, but close. Tire pressure was the first thing I did when I bought this brick. Lowered to 18-20 with no result, ride still stiff. I went back up to 25-28PSI because I have 205 55 15's on the front and at 18-20 it took two people to turn the wheel when parking or backing to turn out of drive. We are in a 5 day rain delay until I can test it without shocks. That's my next try. Any advice on the best SOFT shocks to buy? There is not an Advance Auto around here that sells "used" shocks. I even put more foam on the drivers seat bottom. Didn't help. I may mount seats with springs next or rubber bushing in place of the hard spacers.
Craig