Skip to main content

Reply to "Starting my Build"

@TreyG posted:

Happy New Year!

I tried to drain my transaxle today to remove it. I don’t have 17mm hex wrench. I tried using a bolt with a couple nuts jammed on it, but that failed. (25 years ago I welded a bolt to a piece of rebar for a homemade wrench, I guess I should have kept it!)

Y’all know any tricks to getting it out other than the correct tool? I am going to look around town tomorrow to see if I can get a wrench or socket locally, but don’t have high hopes for finding it local.

I had no luck with a double-nutted 17mm bolt either when I couldn't find my socket. (I turned up in the door pocket after an extensive search. DOH!)

IIRC, it was <$10 at Lowes.

FWIW, this is the wrong time if year to be messing with gear lube.

My suggestion? Put the new stuff in a pan of hot water for a while, and either go for a long drive or put a heat lamp on your trans for a few hours before you drain it.

×
×
×
×
×