Skip to main content

Steering

Our speedsters drive nice and straight.  However, the steering wheel is of center.  I didn't want to mess with adjusting the tie rods.  I took the steering wheel off to just rotate it a few teeth. It can off easy.  Putting it back was a pain.

This may be a dumb question, is the steering shaft suppose to move in and out?  When I was putting the steer wheel back on I had to push real hard to compress the spring.  when I did that the shaft would push in an inch or so making it impossible to put the steering wheel  nut back on.  I had to use a strap at the knuckle  to keep it from pushing in.  This just doesn't seem right to me.

Original Post
×
×
×
×
×