Skip to main content

Steering column play through firewall - solutions?

Howdy to all. On my new acquisition, a '92 Beck Spyder (which I believe has the same steering column set up as any current Beck Speedster), I have a crap turn signal unit that is loose and needs replacement, to which a prior owner put some black caulking and this all needs to be cleaned up. Planning to replace the parts including switching to a pretty, new banjo-style wheel.  Before doing so, have to address the steering column 'looseness' that I don't immediately see a solution.

Concern is how to eliminate the play (about 1/4") in the steering column through the firewall? I'm thinking a shim, or plastic/rubber collar would slide nicely around the column with the wheel removed, and shore up this gap. Would rather not drill or anything if I don't have to. Anything like this already made for the occasion?

DIY solutions that you folks see for this one? I took some pics of the situation...

Marcel C, Paso Robles

IMG_4162IMG_4163IMG_4164IMG_4165IMG_4167IMG_4168

Attachments

Images (6)
  • IMG_4162
  • IMG_4163
  • IMG_4164
  • IMG_4165
  • IMG_4167
  • IMG_4168
Original Post
×
×
×
×
×