Sway Bar Fitment

I'm in the process of adding sway bars front/rear so that I won't be slow when I get to SMO.

The rear bar is on but with the front I have some questions. The bar is mounted but I had to readjust my steering box stops as I had contact with the inside of the tire on one of the bushing clamps. I've turned the clamps to keep the threaded studs away from the inside of the wheel.

I'm using a bar that I had and it fit just fine but that was before I had installed dropped spindles and I see on the Aircooled site that they offer two bars for standard and dropped spindles. I have a new front bar which is stamped 9163 and believe its Empi.

When I mount this bar up it sits flat on the lower control arm (drivers side ) but will not sit flat on the other side as the grub screw and lock nut interfere.

Some of this might be normal/ok but looking fro some input/experience.

Attachments

Hide

Images (3)

8/1/216:21 AM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Premium Membership Required

Supporting Member

Please help keep us running!

Please wait...