Skip to main content

Reply to "Swing axel or IRS"

The Weldcraft website says they widen wheels so it seems like they would change the offset too:

https://weldcraftwheels.com/

I don't know if the wheels are still available from Beck.  At the time they were wheels they used on Spyders.

Beck usually (or used to) use a long swing axle on Spyders. This actually is closer to the original Spyders as all the original Spyders used the same size wheel and tire all around. They had a lot of backspacing for the 5.5" rears. Beck still use 4.5" in the front, less rubbing this way.

×
×
×
×
×