Reply to "This just popped up on another forum."

Michael McKelveyAnn Arbor Supporting Member

@Gordon Nichols, I am just replacing the boots, not the ball joints themselves.

The boots were replaced just a few hundred miles ago by a shop that was doing other things at the time. They told me they were using the "good" boots. They were marked Germany.

I purchased upper and lower boots. The upper boots are smaller than the lower ones. The upper boot I took off is the same size as the lower.

So far, I have been unable to get the top of the top boot into the groove. Maybe it is because it is the wrong size. Also, I put grease inside the boot and it got all over everything. That made it easier for the boot to slip out of the groove.

So, should both upper and lower should be the same size, or is the upper really smaller?

11/9/208:56 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Premium Membership Required

Supporting Member

Please help keep us running!

Please wait...