Skip to main content

Reply to "Thunder Ranch build thread"

Pretty much. Remove the axle tube boot bolts on trans end. Use the nut on the end of the axle to pound on while pulling axle tube straight outward. Use a dead-blow.

The outer bearings are about $15-30 each, I replaced mine. Should come off with a really good smack or three. I think I slid a socket over the end of the axle and let that strike the nut.

Get a long and large pair of needle nose and grind into the ends so you can get the heavy snap-rings in the diff out to get the spade ends of the axle out. I can talk you through it if need be.

BTW, your jack points look great!

Last edited by DannyP
×
×
×
×
×