Skip to main content

Reply to "Weber carb leaking?"

@DannyP posted:


On the idle jets, those JayCee jet holders can really change the way your day goes on a Speedster. You can use an allen key to spin them out, without getting interference from the carb top/fuel inlet, like you do when using a flat-blade screwdriver.



@Bobby D posted:

The jet holders are a must for speedster as it hard to see the idle jet.  The allen key makes it so much easier.

When Pat built my engine the Jet Doctors were an automatic. I cut off an allen head key and use it in the appropriate size socket and remove them with a small driver. I reinstall them by hand and just a small amount of twist with the drive to snug them up. I think my idle jet cleaning has just because a common ritual during pre-season prep for the greater amount of driving during spring/summer. I drive it all year since the cold white stuff never lands on the ground where I live and mid-day temps in the winter can still be in the 60's. But I figure if I'm cleaning them they won't get dirty.

×
×
×
×
×