Skip to main content

Reply to "What am I doing wrong?"

I had a Fram PH 1 filter on a street rod that wouldn't come off no matter what I did and I ended up crushing it in the process.   Thought about it for a minute and looking at the new replacement filter i now had a plan.  Decided to cut the filter and 3/4" from the top. There are 1/4" holes in a circle on the top of the thicker horizontal portion of the filter, I fabricated a  round 1/4" thick plate with 1/4" stainless bolts and nuts secured to the plate that lined u with four holes on the filter top. Used a breaker bar to go between two of the 1/4" stainless bolts and still had to use a foot long pipe extension over the bar , that finally did the job w/o causing any damage.

×
×
×
×
×