Skip to main content

Reply to "Wiper install"

Carlos G posted:

I reconfigured mine and they park on the drivers side now. It's installed and doesn't blow fuses. Now I just need to order another arm and two 10" blades.

My bikini top will be similar to yours in design, but will have a frame that can be collapsed that will support a bow above your head.

I need to work on my cool weather tonneau cover first. I have the pattern and material, I just need to get to it.

Before I installed the wiper assembly, I installed a little something to pop the trunk lid up a bit so that I can fit my fingers under the edge to open it. I used a piece of aluminum angle, a spring from a D cell flashlight, and the grommet that came on my wiper assembly.

Trunk spring

 

Gentlemen of the SOC:

That, right there is a very nice quality fabrication. Stainless button-head hardware with washers. AL angle, rounded at the corners

... and the genius spring arrangement. Carlos, you sir, are the man.

×
×
×
×
×