Skip to main content

Reply to "CMC Speedster Build Thread"

Gordon supplied the paper engine template trim to many here.  My CMC came with precut body-color (gelcoat) pieces of fiberglass for sides of the engine compartment and 2 pieces for rear above the muffler. Shown here in build manual.

JB356SR - mentioned hole in the firewall for air intake.  His is a VS with a round hole with hardware cloth over it.  CMC has a 1/2 moon section to be cut out - and the rest of the front has a piece of black rubber hall mat applied. Is that the piece f vinyl mentioned by JB?

 

Attachments

Images (2)
  • mceclip1
  • mceclip2
×
×
×
×
×