Skip to main content

Reply to "Head Stud Problem"

next problem to solve is rocker arm geometry.  I have the scat forged 1.25 rockers.  The swiping of feet across the lash cap is to high.  I did the dry erase test on the lash cap.  The swipe is above the mid line on the upper half of the lash cap.  It seems to me that the rocker needs to be shimmed up to get the sweep lower on the cap.  An of course I will need to work with the push rod length to make sure oil can pass through the channel on the adjusting screw.  I am thinking right.  I don't see how just changing the push rod length would affect the swipe if the fulcrum point doesn't change.  A longer or short push rod would result in a longer or shorter adjustment to the foot adjuster the push rod side.

×
×
×
×
×