Skip to main content

Reply to "Maui garage find Intermeccanica rebuild"

 

mppickett posted:

...I'm thinking about mounting something on the firewall...

 

 

Maybe a good time to mention that the top of the firewall is usually considered the best place for an oil breather (if you were thinking about putting something else there).

Mounting a breather high makes it easier to give the output tube a steady, downhill run to wherever it's going. And a breather with enough volume to work well takes up more space than is available just about anywhere else in a Speedster engine compartment.

My VS has about five inches between the firewall and fan shroud, and the oil breather takes up about half of that.

 

SpeedsterBreatherHose02

 

Attachments

Images (1)
  • SpeedsterBreatherHose02
×
×
×
×
×