Skip to main content

Reply to "Tow Bar Measurements - 65 VW Pan - CMC 1989 Speedster"

My stock tow bar interfered with the bumper U bolts at either end of the H beam so I made it narrower by about 2".  I cut the existing welds.  I put a threaded rod through the hollow cross piece and also added bots to the receiver.  I tested it and then had it welded up.  I normally tow it with a Toyota 4 Runner (4WD) with an adjustible height hitch but also towed it 1K miles with a 4 cyl Toyota Camry. Don't forget  tow cables of chains between tow and towed vehicles (Not shown).

FL bound 1tow bartow bar 2towbar 3

Attachments

Images (4)
  • FL bound 1
  • tow bar
  • tow bar 2
  • towbar 3
Last edited by WOLFGANG
×
×
×
×
×