Skip to main content

There was an unexpected issue forwarding you to "Twitter" for authentication. Please try again later.
×

 My experience with JPS was about 5 years ago.  At that time there were 5 or 6 employees including the owner.  Also at that time, if I remember correctly, the owner experienced some health and personal problems.  It may be the owner's problems have passed and the focus is back on car building.

The build process was very annoying, and being generous, JPS was less than standup during the build.  In short, I would not do business again with, or recommend them to anyone. 

Here's the sad part, JPS does a pretty good job building cars.  Mine is now 5 years old and I've enjoyed it.  Keeping in mind the price point,  I feel the car was worth the money, excluding the unnecessary lack of truthfulness and some minor tweaking.

Perhaps my expectations were too high, but I do my damndest to ensure people who do stuff for me get paid promptly and I expect to get what I pay for when promised.  Obviously, stuff happens, so if parts don't come in, people get sick, delays happen and the person paying for the build deserves the truth.  I always remember those who respect and disrespect my time.

I would not get into any dealings with JPS that ship has sailed.  However, if any SOCer has a chance to buy an already built JPS car, enlist help from one of our SOC heavyweights to check the car out, it may be a good bet. I like mine.

 

 

 

 

As I mentioned in another thread, I ordered a JPS Speedster through Patrick. It’s due in May.  I’ve had several pics sent to me along the way like he said he would do. I had a chance to meet with a newly delivered owner and was nice enough to let me drive her car. Nice build.  Shifter a bit sloppy for my taste but my trans will be a bit different with shorter shift. ( I knew going in it wasn’t going to shift like my 11 Year old 997! I  had lots of questions and Patrick always responds in a timely manner. Good experience so far. I opted for the 2332 motor can’t wait to bring her home. 

You can have perfect shifting by having a CSP shifter sent directly to your builder to install in your car.  Can't praise it enough plus you don't have to push down on the stick to get reverse.  CSP makes great stuff--I believe it's all made in Germany.  I know you are excited about getting your new Speedster---good luck with it!

Ha. I have similar pictures sent to me of a pretty painted roller etc. I wonder what color it is today and who is driving it?

After breaching contract we adhered to faithfully well over a year ago, Steele refuses to refund money or deliver car. Lots of interesting stuff has come to light. Some will listen and some will not. All I can say is John Steele and JPS is red hot right now. 

Just sayin'

I attribute the 2332 reliability aspect to a mild cam and 8:1 compression along with adequate cooling and oil. At 10:1 it would likely do wheelies. It is the largest displacement etc I would consider for street use. Couple that with good suspension and rubber, a well modified tranny, proper fuel system, and careful setup (timing jetting etc) and you should have a killer rig. Only thing I could improve upon now is a smoother shifter and I'm working on that. Otherwise I have been a happy camper for better than a year now. And it's not hard on the eyes either. I think you will be happy. Just stay clear of Ol John Boy. You don't want to get any of that on you. Not one of mankind's greatest accomplishment.

Just looking at the coupes recently and although I don’t regret my upcoming speedster build by any stretch.. I would imagine less looky loos with a coupe. 356s look good in any guise. Although I’ve never been a “look at me “ dude, I know speedy will get more attention than I want. Part of the deal I suppose lmao 

@4Banger@9971- would either of you care to share engine specs- specifically, what cam/rocker  combo and heads/compression ratio your engines are/will be? 

4Banger- I'd love to see some shots of your car, and my apologies if you already have, but have you posted any pics? My mind is drawing a blank here.  Al

@MaxMartens- please post pics when you take possession! Any details on how your car is being outfitted?

Last edited by ALB

Also, and this is important from what we’ve seen in the past on other builds from him, do an inspection of the car based on this checklist:

https://www.speedsterowners.co...acceptance-checklist

Always best to check the car out before it leaves his shop so you can get sub-par stuff fixed before it ships, but if you already have it then this list will give you a really good idea of what’s up to snuff and what needs attention.  Pay particular attention to safety-related items for obvious reasons but it’s a pretty thorough list from what we’ve seen on other people’s cars.

Wish you the best of luck and many happy miles with your new car!

Gordon

Funny background story - When he showed up at Carlisle with his first coupe, years ago, he had not yet figured out how to source the bright metal molding for the windshield frame (or any of the windows, really) and just left the black rubber molding naked.  

The general consensus at the show was that it didn't look very good and we all said so (it's always fun to get Steele agitated, and it happens so easily - Merklin is pretty good at it, mostly by asking simple questions).  

He went off in a huff, but a couple of cars later the bright molding started showing up.  If you don't like it, it just has a tab that fits into a slot in the rubber and is easily removed.

Last edited by Gordon Nichols

As another aside, that coupe looks a lot like Tom Marantz's JPS Suby-Coupe, which I was fortunate enough to ride around in at Carlisle for three days a couple of years back.  IIRC, Tom has a Non-turbo EFI Suby 2.5 with the Suby 5-speed and the Aussie flipped ring and pinion.  It is very, very quick and although I spent all my time in the passenger seat (I don't ask a lot of other people to let me drive their cars) I did notice that the torque curve came on seemingly right off idle and was strong up past 5 Grand (we got on it a couple of times getting onto the interstates - WOW!).  Very impressive.

Also impressive was the level of workmanship.  WAY better than Tom DeWalt's early coupe (which was, by all accounts, pretty much a disaster) with a high level of fit and finish inside and out.  Tom said he had a few minor things to sort out after delivery, but they were Meh.  My single complaint was that it was pretty loud (like needing earplugs loud) but that's what the owner asked for and he was happy with it.  That's also easy to change over time, so no big deal.

Tom's build was in the middle of Steele's last(?) health crisis (Heart Attack) so that delayed everything for a while, but Tom, being a Cardiologist, understood what was happening and gave him the slack he needed to recover.  I suspect that it has been difficult for him coming out on this side of the heart issues which might explain some of the changes we've heard of, but I simply don't know.  I'm just happy that he is fulfilling his contracts to deliver some coupes to happy new owners.  Hell, I ended up in hospital with stress burn-out for a while once, so who am I to comment?  I just admire that he's back building cars.

Gordon Nichols posted:

Funny background story - When he showed up at Carlisle with his first coupe, years ago, he had not yet figured out how to source the bright metal molding for the windshield frame (or any of the windows, really) and just left the black rubber molding naked.  

The general consensus at the show was that it didn't look very good and we all said so (it's always fun to get Steele agitated, and it happens so easily - Merklin is pretty good at it, mostly by asking simple questions).  

He went off in a huff, but a couple of cars later the bright molding started showing up.  If you don't like it, it just has a tab that fits into a slot in the rubber and is easily removed.

Where do you get the bright metal moulding and window rubber for a coupe, besides Stoddard and others so priced?

I don’t know.   You’d have to ask Steele.

But remember that there is a big difference between a metal car and a fiberglass car in thickness of material where the rubber gasket is fitted to the body, so an original 356 window rubber probably won’t fit, I don’t know.  

That is among the many reasons that building replica coupes means sourcing a lot of esoteric parts, like glass rubber and trim and those pesky little latches on the rear quarter windows.  It takes time to find cost effective parts or get them tooled and built custom.  “Stoddards” may not be the answer.

Got mine delivered a few months ago .. 2332 with pro street  trans and shotgun A-1 Exhaust. If anyone interested yeah I’ll post pics it’s a good build I had a good experience w Patrick and John. Blast to drive. 

There’s only one problem... I made the mistake of driving the new 992. It’s amazing. Speedster and 997 will go to make room. Love my JPS speedster good quality build. 

Gordon Nichols posted:

I don’t know.   You’d have to ask Steele.

But remember that there is a big difference between a metal car and a fiberglass car in thickness of material where the rubber gasket is fitted to the body, so an original 356 window rubber probably won’t fit, I don’t know.  

That is among the many reasons that building replica coupes means sourcing a lot of esoteric parts, like glass rubber and trim and those pesky little latches on the rear quarter windows.  It takes time to find cost effective parts or get them tooled and built custom.  “Stoddards” may not be the answer.

I imagine that's why Special Edition is going with glue-in glass on the Beck Coupe.  On an outlaw like mine it should look perfectly acceptable.  I'll have to see on a stock-looking car.  The prototype had thick black paint on the back side of the glass where the glue was, but production models will have a less noticeable line.

9971 posted:

Got mine delivered a few months ago .. 2332 with pro street  trans and shotgun A-1 Exhaust. If anyone interested yeah I’ll post pics it’s a good build I had a good experience w Patrick and John. Blast to drive. 

There’s only one problem... I made the mistake of driving the new 992. It’s amazing. Speedster and 997 will go to make room. Love my JPS speedster good quality build. 

Looks like that decision has been made! Keep the Speedie in a "Mama don't know" storage space ...

Add Reply

Post Content
×
×
×
×
Link copied to your clipboard.
×
×