Skip to main content

Closed1,000 replies

Shaping 550 Fenders...

arajaniarajani

As many of you know, I bought a 550 spyder built by a company called "CMI" back in the 1980s. They are cool because they are narrower and shorter, like the originals. However, being the knuckle-heads they were, they splashed a mold off of a wrecked 550 that was poorly repaired (see the photos!), and proceeded to remake it with the flaws. 

I bought the car from 502 Motoworks (builders of Alloy 550s) who purchased it from Russ at Fibersteel. 

After getting a new tail from Ric at Rusty Tubs, @chines1 was given the task of fitting it to the car, and shaping it. 

I'd say his team has done a pretty nice job! 

Here's the CMI car with the original (misshapen) tail (check out the wheel well, for starters):IMG_3918

Here's the tail of an original car (Ingram collection, 550--0073):

IMG_4113

Here's what Carey has done with my car:

IMG_7492

Here's 550-0060. The rear fender comes to a point from this angle. 

FullSizeRender

Once again, Carey captures the enigmatic shape incredibly well:

IMG_7491

Attachments

Hide
Images (5)
  • IMG_3918
  • IMG_4113
  • IMG_7492
  • FullSizeRender
  • IMG_7491
Original Post

Replies sorted oldest to newest

arajaniarajani

@TRP: this car has a completely different shape from the other replicas -- it hasn't been widened or stretched at all. Given that I love originality, this car really does it for me. I'll never own a Spyder that drives better than a BECK, but this car looks super cool.

As for the plan, we are painting it French racing blue with white darts. I have alloy/steel 16" wheels made for it, and an original 420 mm Petri Banjo (not a 400mm like the Flat4 replicas). Carey has made another hard half tonneau, as well as a single plexi windscreen. 

The motor was posted here: 

https://www.speedsterowners.co...1#576789226690983351

ALBALB
arajani posted:

@ALB -- YEP! Those drilled wheels are really cool. That car originally belonged to a...

I forgot to ask, Anand- are you going to be drilling holes in the wheels for this car? Knowing that it's historically correct and all, how could you not?

And I didn't say it before, but good on ya for taking the time to correct the rear fender arches. They suit the car just so much better! Al

Last edited by ALB
Next
Post Content
Remove This Ad

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires a premium membership.

Supporting Member

Please help keep us running!

Supporting members have donated about $4.00 a month ($49.00 US per year) paid annually.

  • Priority support
  • Removal of inter-page (between thread) advertisements.
  • Access to Build Manuals
  • Access to Knowledge Base
  • Access to Supporting Members events.
  • Access to Leveraged Group Buying from site Merchants.

AUTO RENEW: You membership will auto-renew after 12 months. If you prefer not to auto-renew, you can cancel your premium membership at any time and it will remain in effect until the end of the 12 months. To cancel, sign in at SpeedsterOwners.com and navigate to: (Your User Name)  > Premium Membership.

PLEASE NOTE: Your credit card will receive a charge from CROWDSTACK PAY, the payment processor, not SpeedsterOwners.com.

$49.00 per 12 Months (plus tax if applicable)
×