Skip to main content

Replies sorted oldest to newest

Have you checked http://www.speedsters.com/  ?  There are over 600 Speedsters registered there in UK with many using a shortened VW pan.

In US we just measure 2x, cut once about ~10.5", align using 2x4" lumber and welding it back together.  I'm sure an alignment table and a professional welder would do a better job but I've not see one come apart and US doesn't inspect much but lights, horn and wipers.  European countries are far stricter.

Last edited by WOLFGANG
Post Content
×
×
×
×
Link copied to your clipboard.
×
×