Skip to main content

Big day. With the help of Marianne, Kanako and David, we got the body attached to the chassis. Lots of prep work involving the AC condenser, fan, AC dryer, electrical lines and hoses in the space behind the firewall that's pretty inaccessible after the body is on.

Much to my surprise, that involved pretty much all of the AC parts except for the compressor to get the right hose orientations and lengths.

Kana took off the manifolds and carbs and drove to the house of tarp while David and I pushed. I ran the  modified come-along while they bolted the corners. It's been just a little more than a year since the car arrived. Being totally honest, I think I've got more than 80 hours in the rebuild already and I haven't even torqued the wheel lugs yet. Who'd have thought? 

By the way, the come-along is bolted to a reinforced 2x6 and I welded a 3 ft long 1-1/2" pipe over the short handle to get the leverage I wanted. And painted it red so I wouldn't hit my head on it more than 2 or 3 times.IMG_20190823_150539IMG_20190823_150547IMG_20190823_174942IMG_20190824_114706IMG_20190824_145550IMG_20190824_151108IMG_20190824_152457IMG_20190824_154541IMG_20190824_155155IMG_20190824_155436IMG_20190824_155436IMG_20190824_155535IMG_20190824_160041

Attachments

Images (13)
  • IMG_20190823_150539
  • IMG_20190823_150547
  • IMG_20190823_174942
  • IMG_20190824_114706
  • IMG_20190824_145550
  • IMG_20190824_151108
  • IMG_20190824_152457
  • IMG_20190824_154541
  • IMG_20190824_155155
  • IMG_20190824_155436
  • IMG_20190824_155436
  • IMG_20190824_155535
  • IMG_20190824_160041

The House of Tarp is empty and Marianne says it's ready for tear down! Fuel pump, AC hoses, compressor, condenser, fan wiring, pan sealing, seat belt installation etc, etc. It starts and runs and was driven from the back yard to the garage for final assembly. Marianne guided me past the clothes lines, house and gates with millimeters to spare.  Huzzah!

Now the rest of the parts can be installed in air conditioned comfort...

IMG_20190830_173414

Ready for tear down!

IMG_20190830_174635

Link to yard driving video:

https://photos.app.goo.gl/qBAitJBC1pVDvAm97

 

Attachments

Images (2)
  • IMG_20190830_173414
  • IMG_20190830_174635

Other than disassembling the house of tarp, I've been working in air conditioned comfort for the last couple of weeks. Lots of time setting up the plumbing for the fuel system and the air conditioning. Lots of time fitting and modifying the "new" 15 year old wiring harness that the PO had Henry build for him. 

IMG_20190904_163951

Lots of time setting up 2 additional fuse/relay area (one in the repurposed battery box and one on the engine firewall).  Then just hours and hours of crimping, soldering and heat shrink, cutting some things back out and getting it right the second time.

Oh yeah, I've got a battery cutoff switch and some honking big primary, ground wires and grounding buss.

IMG_20190906_121809

Small fuse and relay area on the side of the AC box (old battery box). These feed the fuel pump, driving lights, windshield washer and +Vs for the radio and phone chargers. You can see the other side of the battery cutoff switch (sans key) on the right. Spare wires from the engine area and the cabin are stored below the relays.

IMG_20190906_121741

Battery box with the AC evaporator installed. Blower hoses run from here into the dash and footwells. Windshield washer filler neck can be seen on the passenger side of box. The bag and pump are attached on the other side in the wheel well.

IMG_20190914_094213

The rear wiring is complete, the dash is 85% the front end is complete, but my parking lights pulse in time with the fuel pump. I'm going to see if adding an additional ground wire improves the brightness. Everything but the alternator light is an LED so things should be pretty darn bright.

Fuse/relay box for Speeduino, coils, AC condenser fan, AC clutch and oil cooler fan is in upper left corner. Circuit breaker on feed from the alternator is on bottom right, below the Speeduino box.

IMG_20190914_094133

IMG_20190914_094121

Nearly done with the dash. I'll add the gauge trim rings at the end.

IMG_20190914_094149

Driving lights automatically come on when ignition is on and switch off if just the ACC switch is on. Battery is tucked way up in the nose.

IMG_20190914_094257

My biggest sticking point was the flasher relay. Totally unresponsive and then it popped a 15 amp fuse. At first I suspected the new fangled LED flasher relay, but it turned out to be a miss-wired relay socket. I'd complain to Henry, but I suspect that the tech who built the harness 15 years ago may have escaped justice. Fortunately, once I got the socket straight, turn signals and emergency flashers worked fine.

I had a stupifying experience trying to get the horn wiring set up. Turned out that even a shiny copper tab on the steering column won't conduct if the tab rivets and column underneath the rivets are corroded. Oh yeah, 14 years sitting outside on the edge of the beach... I just drilled a new tab mount and stuck a self-tapping stainless screw in it. Beep beep! 

Finishing up the radio box which also houses my fast phone charger, USB charger, AC cabin temperature switch and the circuit that flips on the 'low gas' light when there's two gallons of gas left in the tank. Oh, and it also has a $10 radio. That'll be finished tomorrow and then I'll start on the doors, mirrors, decklid and windshield.

The car started from turning a key in the dashboard switch for the first time in over 15 years. I know I'm getting excited! PS, Marianne is pretty happy that the house of tarp is just a fond memory. We're now having a conversation about when the grass will be back.. 

IMG_20190901_162744

Mike

Attachments

Images (11)
  • IMG_20190914_094257
  • IMG_20190914_094213
  • IMG_20190914_094149
  • IMG_20190914_094133
  • IMG_20190914_094121
  • IMG_20190914_094108
  • IMG_20190914_094026
  • IMG_20190906_121809
  • IMG_20190906_121741
  • IMG_20190904_163951
  • IMG_20190901_162744
Last edited by Michael Pickett
Gordon Nichols posted:

You got ahead of my realization that you might install a radio.  I have a Car radio in “attic stock” with a built-in 8-track player that would have been the bomb in there....    

Thanks, but the 10 buck wonder was installed first thing this morning. I got tunes. Mostly I listen to jazz, country, rock, blues, classical, gospel, a wee bit of folk, and oldies. But only the good stuff.

Gee, I could have been cruisin' down the road to my old Steppenwolf or Fifth Dimension tapes, darn it.

mppickett posted:
Gordon Nichols posted:

You got ahead of my realization that you might install a radio.  I have a Car radio in “attic stock” with a built-in 8-track player that would have been the bomb in there....    

Thanks, but the 10 buck wonder was installed first thing this morning. I got tunes. Mostly I listen to jazz, country, rock, blues, classical, gospel, a wee bit of folk, and oldies. But only the good stuff.

Gee, I could have been cruisin' down the road to my old Steppenwolf or Fifth Dimension tapes, darn it.

Thought you were going to say you were cruising down the road trying to loosen your load and you had seven women on your mind. Take it easy anyway.

Short update. Wiring is done and things flash, honk and make light. TACH-ADAPT converts ECU tach signal into something that makes sense to the 914 tachometer. Windshield installed (thanks @Alan Merklin and @Gordon Nichols), decklid installed, doors hung. $10 buck radio works! 

Trying to finish up the safety things today so the county inspection guys can come over to take pictures. My brother is coming to visit next week and I'd love to be able to take him for a ride.

So, installing the door innards, adjusting headlights and finishing up the shoulder harness installation. Still tons of things on the list for after registration, but it's looking real faux sure!

MikeIMG_20190919_055107IMG_20190919_055050IMG_20190919_055126IMG_20190919_055748IMG_20190919_055822IMG_20190919_055853IMG_20190919_055925IMG_20190919_061434

Attachments

Images (8)
  • IMG_20190919_055107
  • IMG_20190919_055050
  • IMG_20190919_055126
  • IMG_20190919_055748
  • IMG_20190919_055822
  • IMG_20190919_055853
  • IMG_20190919_055925
  • IMG_20190919_061434
Jimmy V. posted:

I have a question concerning the shoulder harness mounting point. Is it attached to anything else other than the fiberglass body with maybe a large washer on the back side?  Thanks in advance for your answer.

Hey Jimmy, I fabricated brackets that extend upwards from the chassis and terminate in large plates that curve behind the fiberglass. The bolts pass through the fiberglass and the plate.

Here's a link to some pics and more explanation: https://www.speedsterowners.co...4#590585064152345514

Mike

Gordon Nichols posted:

@Alan Merklin - Is the Miata roll bar robust enough to hold things up in a roll-over?

Curious minds want to know........   

No ,  I bolt it to the fiberglass tub wall only,  it's a cosmetic show bar. David Bayne used a Stainless steel Miata  double hoop bar and had it reconfigured  into a stout roll bar to his Metal-Craft  speedster chassis

 

Last edited by Alan Merklin

I  need some advice. The good news is the county director inspections dropped by and said the build looked good. I'll be taking it through the inspection/registration process next week. 

The bad news is I'm having engine problems. It runs lean at a low rough idle and after running for a minute or two it starves for fuel and stops (I've got a wide band O2 and can see what's going on). Since the time it was running great, I've added a new inline filter, 10 feet of fuel line, a fuel pressure regulator (1.5 psi) and new fuel lines to the carbs. I have also sprayed brake cleaner (flammable) around the intakes and vacuum balance lines and seen no change.

I've checked the feed line from the tank, the filter before the pump, the filter after the pump and seen fuel come out of the carbs when the carb filter caps are removed. I've tried taking the fuel tank cap off to make sure it wasn't creating a vacuum. I've opened up the pressure regulator and nothing changed. At the end of the day, I decided to pick up a new fuel pump to see if it was weak. I'll test it tomorrow (Pacific time). Wish me good luck and let me know if you have any ideas.

One other thing I noticed, when I turn the steering wheel it feels a little crunchy as it turns. It's a "new" (sitting 15 years) steering box. The steering column is old, old, old so maybe bearings there? Needs lube? It turns just fine but it feels like it needs some attention.

Thanks!

Mike

 

Last edited by Michael Pickett

If you have Kadrons, then 1.5# fuel pressure.

If you have Weber/Dellorto/Solex, then 3# pressure.

Back out of your fuel system "upgrades" one step at a time:  Kinked hose/line somewhere?  It sounds like a clogged fuel filter so you're not getting full flow - can you by-pass the filter with a short piece of hose one at a time to see if that helps?  Do that for the fuel pressure regulator, too.  If you have a single filter before the pump, that's all you'll need - one after the pump isn't necessary.  I doubt that it's the pump, as it had been working OK before the changes, so I would suspect one of the upgrades. One of the upgrades was that 10' of hose, which is cheap.  Get another 10', make sure it has no obstructions and re-install.  That's all I've got.

If you can feel the scratchiness in the steering wheel, then I would suspect the bearing at the top of the column, right under the steering wheel.  What is in there depends on the year of the VW donor column.  54 - 67, 68 - 70 or 71 - 79 all have different top bearings and different spacers.  Long way to ship, but this might show you different ones to get something closer:

https://www.bugcity.com/shop/s...d2-80ad-c3d208c51b82

Last edited by Gordon Nichols

Fueling problem solved. It was a relay problem. I got fancy and wired the fuel pump relay to turn off if the alternator light was on (fire safety). Something in my setup was wrong and it was taking out the fuel pump relay even if the light wasn't visible. I just simplified it for now and everything works. Tricky problem, but shooting myself in my own foot isn't a novel occurance. I just wish I had thought of it earlier.

Post Content
×
×
×
×
Link copied to your clipboard.
×
×