Skip to main content

Replies sorted oldest to newest

I think the Speedster tow bar length is OK Bruce. You'll just have to modify how it attaches to the new Mendeola mechanism.  Possibly welding on some tabs there and then another set of tabs on the end of the tow bar that have pins welded on them  facing the same direction so you can mount the bar up on both sides simultaneously and then install cotter or lock pins in the ends of those ?............Bruce

LennyC welded a couple flat brackets to his frame tubes in the very front, cutting small slots into the fiberglass. His tow bar attaches with a couple hitch pins.

I don't think he ever bottoms out, so they aren't too low.

I use a custom towbar. The speedster bar most probably won't work, as there are frame tubes welded to the beam on Spyders that make the space 3 to 4 inches narrower than a stock beam/towbar.

Not a big deal to modify or make a new one though.

Post Content
×
×
×
×
Link copied to your clipboard.
×
×