Skip to main content

Hopped in the speedster to return home, and the darn seatbelt wouldn't extend. After SLOWLY feeding it belt, I SLOWLY pulled it out. No joy. I repeated the process while tapping on the retractor. No luck, again.

My dog and I both rode back home without seatbelts and I felt like I was replicating the vintage speedster experience. I didn't like it.

YouTube has a video on how to take the retractor apart and do nothing and it will work again. I'm fine with working on anything on my car except the transmission and the seat belt retractors.

I ordered a new one and am making a list of things to work on while I wait for delivery...Screenshot_20220611-070300

Attachments

Images (1)
  • Screenshot_20220611-070300
Original Post

Replies sorted oldest to newest

I, too, run with non-retractable lap belts.  I can cinch them down as tight as desired with the draw straps after coupling them.  Trust me when I tell you it makes a difference if you find yourself on a curvy road.  The quick release (similar to an aircraft or race car) is secure and very simple to get out of.  Of course there is no three (or five) point harness, but I don’t think I’d like them.

When adjusted properly and fitting well they really keep me firmly in the seat…and they look cool to boot!

4977F5BB-8EA6-4805-BB7F-7977718730C1

Attachments

Images (1)
  • 4977F5BB-8EA6-4805-BB7F-7977718730C1
Last edited by TheMayoMachine

Were you parked on a hill?

I have whatever retractors Chrysler was using in 1992.  The retractor lock is engaged by a small weight hung on a stem.  When the weight is moved by enough force forward or back, it causes a small metal bar to move to engage with teeth on the retractor drum, preventing it from moving to either extend or rewind the belt.  It’s a very simple mechanism and very foolproof.  Parking on a steep incline may cause the weight to engage the bar and lock the belt.  Once a car that’s parked on an angle is moved to a level it usually disengages that mechanism (if the belt has no tension on it).

Sometimes the belt can get folded over on itself through one of the narrow belt guides and prevent the belt from moving, too.

You could try popping the cover off to see what’s binding things up under there.  There really isn’t much in there to cause a failure.    Good hunting!

Post Content
×
×
×
×
Link copied to your clipboard.
×
×