Skip to main content

Replies sorted oldest to newest

When I installed my Brandwood I found that I too could not mount the spare as it was from Beck but, with a little bit of wiggle motion, you "can" make it work by ofsetting the tire a bit.

Shortly after mounting the Brandwood, I installed wide 5 bolt wheels on my car.
I then positioned the new spare on the spare tire bracket so it would clear the Brandwood. I welded 2 lug bolts on the bracket and used lug nuts to secure the tire. Depending on how your spare is mounted, you may have to grind off the original bolt and re-position it to clear the linkage.
Post Content
×
×
×
×
Link copied to your clipboard.
×
×