Skip to main content

Replies sorted oldest to newest

My Spyder is from TR, but is similar to the Beck insofar as Chuck Beck engineered them both.
I fabricated two simple mounts for the Brandwood shifter from aluminum angle stock and attached the shifter to the center metal piece in the floor of my Spyder. (See photo in my photo file "preuss2."
No gate is required although I have seen them installed over the chrome shifter housing supplied with the Brandwood shifter kit with the shift pattern and "Spyder" engraved on them. I don't know where you can purchase the gate, but someone else who reads this post may.
Jim
ProSpyder
Post Content
×
×
×
×
Link copied to your clipboard.
×
×