Looking for CMC door hinges. If you have any for sale let me know. Thanks.
Original Post
Classified postings do not allow for discussion (replies are not allowed). Direct message the member if you would like to discuss the item.
The Classified section is open to any individual (non-commercial firms) posting of items for sale. Members posting commercial advertisements must be enrolled in a Supporting Merchant program.
Postings without relevant details (PRICE, location, condition, etc.) will be deleted.
Replies sorted oldest to newest
we have them in stock.
One thing I noticed...having just replaced mine....is that the new castings are a little off from the old ones. I had to split each hinge by removing the pin and using one half from the new one and one half from the old ones and pinning those together. The mounting holes are off.
Mike
Mike373 posted:One thing I noticed...having just replaced mine....is that the new castings are a little off from the old ones. I had to split each hinge by removing the pin and using one half from the new one and one half from the old ones and pinning those together. The mounting holes are off.
Mike
I did buy new hinges. The holes on the new hinge are not in the same spot as the old hinge and it wind up pushing the door out at the bottom and back.
I did try what you suggested but it didn’t work.
Oh no...
I used the OLD outer part with the NEW inner part. Is that what you did?
Mike373 posted:Oh no...
I used the OLD outer part with the NEW inner part. Is that what you did?
Yes
Does the bottom hinge lay flat? Also I would think that you could open up the holes on the bottom hinge to allow for some movement to adjust the bottom of the door inward.
JB356SR...Did you get the hinges to work?
Cool. Yeah, kind of frustrating that the holes dont line up. I imagine that the castings changed slightly over the years. My Speedy was originally built in the early 2000's and 2 of the 3 holes were off by about 1/8". Not happy when I first got them and spent half the day loosening rusted door bolts to remove the door and hinges, only to find that the new hinges didnt fit. Grrr.
Mike