Skip to main content

Classified postings do not allow for discussion (replies are not allowed).  Direct message the member if you would like to discuss the item.
The Classified section is open to any individual (non-commercial firms) posting of items for sale. Members posting commercial advertisements must be enrolled in a Supporting Merchant program. 
Postings without relevant details (PRICE, location, condition, etc.) will be deleted.

Hi all! I have created a custom radio bracket for my speedster and created a couple extras. I will sell a bracket & radio for $175 shipping included, I can paint the radio knobs if you wish, the bracket frame comes with primer gray paint and needs to be painted like your dash. The radio has a remote, bluetooth, memory slot, usb and audio jack. The radio needs to be sticked to the bracket with double sided tape, I had it like that for over a year without issues, it is a very light device so it holds strong. I also have two speakers and the tan radio covers like the ones in the picture for extra $75 dlls, so $250 for the full kit, bracket, radio and two speakers.

This is a nice looking two knob modern radio that does the job. I decided to go with it instead of an expensive one because it will be around $30 dlls to replace it if it gets stolen, which is something to consider if you leave the car unattended for a long period of time, so if they take it, is not a big deal, like the other modern classic looking radios for around $400, so it has been a great solution for me, and looks great, I can play music from my phone with bluetooth, and I could even take a phone call, but it is too noisy to use it in a rear engine convertible.

Only have a couple available, if they sell out, I could have more in probably 2-3 weeks, bracket is laser cut stainless steel metal, then bent and soldered to the original Porsche bracket shape and size.





IMG_5930444641C9-E501-4320-9EE0-A15C7A681006IMG_6038IMG_6037IMG_6036

Attachments

Images (5)
  • IMG_5930
  • 444641C9-E501-4320-9EE0-A15C7A681006
  • IMG_6038
  • IMG_6037
  • IMG_6036
Original Post

Replies sorted oldest to newest

@jprpdr posted:

Are the speakers flush mounts to the kick panel areas. Other than mounting holes, any other holes need to be drilled. Brand?

I see the radio on ebay.

Thanks!

Hi, yes you need to make a 4”-5” hole to mount the speakers, I believe they’re RCA or JBL, need to double check. The only reason I used this speaker model is because the vintage looking covers I found fit perfectly, any other original modern covers are too galactic looking for a speedster, so I went for looks instead of performance, probably the sound is not as good as a 2021 vehicle, but better than a 1990’s, so for me is good enough.

Post Content
×
×
×
×
Link copied to your clipboard.
×
×