Skip to main content

Classified postings do not allow for discussion (replies are not allowed).  Direct message the member if you would like to discuss the item.
The Classified section is open to any individual (non-commercial firms) posting of items for sale. Members posting commercial advertisements must be enrolled in a Supporting Merchant program. 
Postings without relevant details (PRICE, location, condition, etc.) will be deleted.

Fore Sale: one set of rear IRS T1 Trailing Arms. With bearings / spacers. (less than 2kms (two) on the bearings / spacers)

These make room for more TIRE! another 30mm (1.2") extra to be exact!

I'm about to weld the camber and toe into the arms and would be happy to weld them to your specs.

I just did a set for me and added another degree camber because my car is so low. It's a cinch to add two degrees. I'd recommend zero toe. Stock is 1 degree out.

I've spent hours and hours on snap-on alignment machines. My car is really low and has a perfect alignment - front and rear.

This will be the last set i do.

axles i used are Type 3 automatic IRS LEFT axles that are 389.5mm long. you can buy them at CHIRCO in AZ. the difference in axle length is 26mm (1"), but there is available play in the CV's that i used. also note the 1.5" trailing arm above uses the same 389.5mm axles / CV. Also - the axles are MUCH thicker (~10mm). axles are not included. this is just for the trailing arms, bearings and spacers. i'll paint them marine grade gloss black epoxy.

price is 325 USD
paypal is extra 4%
shipping will be through canada post / USPS.
Original Post

Replies sorted oldest to newest

Fore Sale: one set of rear IRS T1 Trailing Arms. With bearings / spacers. (less than 2kms (two) on the bearings / spacers)

These make room for more TIRE! another 30mm (1.2") extra to be exact!

I'm about to weld the camber and toe into the arms and would be happy to weld them to your specs.

I just did a set for me and added another degree camber because my car is so low. It's a cinch to add two degrees. I'd recommend zero toe. Stock is 1 degree out.

I've spent hours and hours on snap-on alignment machines. My car is really low and has a perfect alignment - front and rear.

This will be the last set i do.

axles i used are Type 3 automatic IRS LEFT axles that are 389.5mm long. you can buy them at CHIRCO in AZ. the difference in axle length is 26mm (1"), but there is available play in the CV's that i used. also note the 1.5" trailing arm above uses the same 389.5mm axles / CV. Also - the axles are MUCH thicker (~10mm). axles are not included. this is just for the trailing arms, bearings and spacers. i'll paint them marine grade gloss black epoxy.

price is 325 USD
paypal is extra 4%
shipping will be through canada post / USPS.

Attachments

Images (1)
  • IMG_1085
God I LOVE that car!!!!

Anyone out there with an IRS grab these now! (Hell, I'm tempted to get them myself) I got a set from Air Cooled and had to do some mods to get my rear shocks to fit and I'm still fiddling with them a bit. I think Mango used stock VW arms and alter them which would make shock placement no problem. If you are limited to wheel/tire width with your speedster this is the ONLY option outside of widening wheels and with that you're still limited on the outer offset.
At that price AND getting custom camber these are a huge steal.
Post Content
×
×
×
×
Link copied to your clipboard.
×
×