Skip to main content

I was never a fan of the aluminum shift knob that came on my car. It just looks wrong and it was cold, especially on cooler days. I have a Spyder so I have no good option for a top.

I do like the look and feel of wood though, and I love the look of the 917 knob. @Kevin - Bay Area

I had a chunk of mahogany laying around and the right size nuts and a bolt.

I glued the mahogany together and roughly shaped it. I also greased the 10mm x 1.5 bolt well and spun a few nuts onto it.

Shift knob 1

I drilled a hole in the block that would allow the nuts to fit. I then epoxied them in. The grease on the threads will prevent the epoxy from sticking to them.  I know there are ready made inserts for this, but I was doing this ala cheap.

Shift knob 2

I then cut off the hex part of the bolt and mounted it in my drill press. I guess you could use a regular drill for this if you didn't have a drill press.

Shift knob 3

Then turn on press and have at it with an angle grinder with a flappy sanding disc on it. I guess one could use a rasp, but the grinder is so much faster and messier.  After you get the general shape, sand it with sandpaper until smooth.

Shift knob 4

I did notice that the bolt I used wanted to bottom out and try to push my nuts out of the knob so I ended up running another nut on and lightly locking it to the last one. This also gave me more room to shape the knob and sand it. Maybe I'll rough up the nuts before epoxying them. It would also help if my impatient self would wait for the epoxy to fully cure.  

Shift knob 5

First of 4 coats of poly.

Shift knob 6

Now that I know it's possible, I'm going to hit up all my wood working friends for their scraps. I want to make one of the 917 versions and also one that matches my steering wheel with the small dark, and aluminum band.

 

 

Attachments

Images (6)
  • Shift knob 1
  • Shift knob 2
  • Shift knob 3
  • Shift knob 4
  • Shift knob 5
  • Shift knob 6
Original Post

Replies sorted oldest to newest

Al, are you heading to Westfield over the Holidays?  Bring the ball and stop by and we'll drill it straight with my drill press.  We can easily make up a jig to hold the ball from moving while drilling.

Check your local hardware/marine suppliers on the Cape for a knurled Riv-nut that'll fit your shift lever threads and we can press that in while you're here.  Might even find time for some Holiday Grog, too.

Do a google search on "metric metal anchors for wood" to see what's out there.

Carlos:  Pretty slick woodworking!

Last edited by Gordon Nichols
Carlos G posted:

I'm not a fan of that lever either.

Do you have a shot of yours?

I also need to get rid of that gas tank hump over the fuel pedal. I have to drive without a shoe on that foot because of my big feet.

I'll post up a photo shortly. Who needs toes? Cut them off, that's cheaper than a "hump-ectomy" LOL!

It is a bit awkward to reach in, but I left mine alone as it forces me to remain flexible enough to reach it. I usually reach through the 4 o'clock hole in my Nardi, which puts my hand right there from outside the car.

$2 in materials? Sounds like money to be made. Have them added to SE and Vintage websites and sell them for $50 a pop. 

Last edited by DannyP
Post Content
×
×
×
×
Link copied to your clipboard.
×
×