Don't know if Rusty Tubs in Bolder City, NV is still in business but their ad is still online.

Porsche 356 Speedster hardtop 356 hard top glaspar (rustytubs.com)

$1500 plus window, headliner, etc.

@Evergreen One  Speedster replica hardtops are really scarce.

I think it's safe to say that NO builder will have a hard top that perfectly fits right out of the shipping container.  Anything you find will have to be modified in some way to fit your car, even if it's Vintage making a top for a Vintage.  On top of that, the shipping and VAT coming from the USA will drive your cost up way beyond $3K USD

That said, you would be a lot better off to find a top in Europe and have it locally adjusted/altered/fitted to your car.  I think that @Marshall has a top from a company in the Netherlands - Sounds a helluva lot closer than California, right?  Maybe this thread will help you find a few sources closer that have something that can be modified to fit.  Also, @Alan Merklin modified a hard top for someone a few years back and might be able to point you to his thread about what he had to do to get it to fit right.

Good hunting!   (And what part of Germany are you in?)

I don't have any idea if he has molds, but I'd contact Greg at Vintage Motorcars Inc. in Hawaiian Gardens CA.

Greg started building Spyders in the mid-90s and shared the building with Kirk. He moved out in the mid-2000s. Eventually, Justin bought the business and moved it to Arizona when Kirk retired. Greg hired ALL of Kirk's employees(that Justin left high and dry!) and moved his Spyder and pre-A coupe business back into the old Vintage Speedsters building. From that point, Greg started building Speedsters as well.

A real stand-up guy by all accounts. Give him a call, if he can get a hardtop for you, he will. And I'm sure he'd be happy to get it to your container for overseas shipment. That is if he can make you a hardtop.

The tops need to be individually fit, then painted. As Gordon said, not a plug-and-play affair. It is quite a bit of work, but if you really want one...

https://www.vintagemotorcarsinc.com/

Greg is so swamped with new Speedster orders right now, I doubt he has any time to actually put one on a car, but he does have molds for them and might be willing to sell you one.  Here's some pictures of the one he did for my "Mean Green Machine" from a couple of years ago.

Being as the car is in Germany, the top would have to be fitted over there I think.

I'm pretty sure from his posts, that that was his plan.

Troy I wish you wouldn't post those pictures of that green car, one of my favorites ever

Lol.  It's one of the ones I owned twice and it was very nice.  I'm pretty sure he sold it not too long ago.

Thank y´all for the helpful hints. I´ll follow up on ´em.

Actually I bought this car from Troy and had it shipped to Germany! Let me tell y´all, getting it through German inspection to get plates, etc was an adventure to say the least ... German bureaucracy is nothing to laugh about and should never be underestimated!! You can´t imagine all the things I´ve learned. But in the end I´ve got it on the road...phew!!

If anybody is planning on bringing one over to Germany, I can certainly coach him through the process.

Back to the issue with the hardtop. As I had previously said, I had started wanting Kirk to build one for me. I was out in CA at the time and had already made a sizeable down payment. Timing was bad, he was already selling the business and the new owner told me he´d move the business to Arizona.

Meanwhile we had been moved to Germany. BTW, someone had asked where we´re at in Germany. We´re between Darmstadt and Mannheim.

To make a long story short, it went back and forth, the prices that Kirk had given me all of a sudden changed under the new owner, the body was not even delivered from Mexico...they put me off...and off...  To avoid any potential additional bad surprises, I´ve tried to get them to sign off on the build sheet with the agreed upon prices...impossible! In the end Greg said he could not build the car. Communication with them was a nightmare. After six months had gone by and no progress, I told them I wanted my money back!! In the end they did return the down payment and we parted ways! Not a real pretty experience though.

Whatever, it cost me a full year, still bought one for my wife´s birthday...just one year later!

Apparently not much seemed to have changed! I´ve sent an email with a technical question to Vintage a couple of months back.....never even got an answer! So much for that

The one on the Rusty Tubs ad I posted above  is not the one they used to offer.  They had a PlastiKon one that didn't have the small 1/4 window. They offer a longer model for kit cars - it also had longer had trimmable bottom piece.

PLASTIKON Porsche 356 Speedster hardtop NEW

<form action="https://order.store.yahoo.net/yhst-63230418117019/cgi-bin/wg-order?yhst-63230418117019+plastikon-porsche-356-speedster-hardtop-356" id="yfc_1" method="post">

Item# plastikon-porsche-356-speedster-hardtop-356

$1,295.00

Availability: Usually ships the same business day

<input class="ys_primary" title="Add to cart" type="submit" value="Add to cart" /></form>

Product Description

. Thanks to the volume, we are able to offer lower pricing on these tops.

PLASTIKON hardtop for the Porsche 356 Speedster. These are nothing like the flimsy clones and older versions from the late 60's and 70's. Molded drip rail, full header bow with reinforced latch area. Ready for final prep and paint. Rear window and rubber included. Freight charges apply. These are in stock and ready to ship. Standard crate up fee is $125.00 or pick up in person.

We can also deliver to the crater and packaging company of your choice.

To see what the non kit car version looks like, use our search engine for, "plasticon".

Be aware they are cut longer, wider, and the arc on the wide window fits only Plasticon style side curtains.

Think of an upside down cone. Keep trimming till it fits yours, as all kit cars are not alike.

These can be painted and finished in any color for $495.00 Axalta paint products with an evercoat G2 base.

PLASTIKON Porsche 356 Speedster hardtop NEW (rustytubs.com)

Not sure if they're making a newer version, but read this old thread before ordering one.

https://www.speedsterowners.co...a-speedster-hard-top

It would be nice if we knew if Rusty Tubs is still in business and still offered these.

I second that.  We've been hearing about "Rusty Tubs" and their second incarnation, "Fibersteel" on here for years and I can't recall anyone actually buying anything from them and telling us about it.

I haven't referred anyone to them for that reason - Zero product purchase data.

Anyone bought anything from "Rusty Tubs" in the past five years?  Comments?

While we're waiting for comments, here's a thread on the 356 registry about them - Looks like those folks have had mixed reviews, too.

http://forum.porsche356registr...iewtopic.php?t=48661

Is there really a connection between Rusty Tubs and Fibersteel?

Carey got the clamshell for @arajani car from Rusty Tubs.
https://www.speedsterowners.co.../shaping-550-fenders

Fibersteel is run by Russ Rodriquez(I may have spelled the last name wrong). They sell predominately Spyder stuff. They also do custom Spyder work such as aluminum interior...

I got drumskins and jack points from them years ago. I haven't heard any bad things about them either, nor of any affiliation with Rusty Tubs.

I haven't done any research on either one, so I could be mistaken.

Was going to say. Fibersteel: I bought from them my replica 550 floor jack and the plexi windscreen on my Spyder. Both shipped fast and were exactly as advertised. Not cheap but there aren't too many sources for these parts.

Rusty Tubs: I have never done business with them and so have no information.

Two different businesses. Pretty sure.

The are different, yes. Russ (fibersteel) makes the Glaspar hard tops that were originally made in Newport Beach. He makes and fits each one to that particular car.

I've got a long story about Russ Rodriguez, John Steele and a Glaspar hard-top. Russ was fantastic, John... less so.

Russ is Fibersteel, and is definitelynot Rusty Tubs.