Heated seats

Cheap way to get heated seats .Got the new kit off Ebay only

Details????

gg

If you're in the States, you can order the kits from Summit Racing. $100/seat. I got them for my wife's car & will probably put them in the Red Sled this winter:
http://www.summitracing.com/parts/RPC-250-1550/

The Summit supplied Rostra one are great quality (I put them in my Yota 4Rnr). Beware some of the ones shipped directly from China on ebay. Rostra also has inflatable lumbar supports which might be interesting addition to the Speedster buckets.

http://cgi.ebay.co.uk/WAECO-HEATED-SEAT-KIT-RETRO-FIT-KIT-2-SEATS-/370416450246?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item563e8a7ac6
Here is the link

Had 'em installed in my car, and they work. The ones I have include a medium and high setting. As I have Speedster-style seats, w/ chest belt holes, I was told not possible to install heater in back portion of seat, above the holes. So I have the heater in seat portion only. they work well, although I will say that when things get really cold, the car has a tendancy to stay in the garage ...

I noticed that Rosta now has a W.E.T carbon fiber series available that you can cut the heat panels horizontally and they still work. I too have the slots in my seat backs. I guess the back piece could be cut in a thin strip to go between the slots and be placed vertically there to catch your lower back. WET apparently is their manufacturer and is not implying being applicable for wet weather conditions. I pictured steam coming off the seats when I first read the model name.

Any idea of the amperage these units will draw? Just wondering if an alternator upgrade is needed to go with these. Jack - you should look into these.

go to www.warmseats.com for seat heaters best deal on the web and they work great..... As for amperage drain, they will work a standard charging system no upgrades needed. I've installed a few sets of these already with no problems....

i have the carbon fiber heated seats in my car. full set (bum and back). the back was cut for the holes.

they work very VERY well.