Skip to main content

Replies sorted oldest to newest

Vicki, I've covered this before somewhere here and on the SpyderClub

This is a re-print of how to make the horn button work on your BECK and also change the current horn button to a starter button, if you print this and give it to your mechanic, it should take him about 2 hours to complete



First thing, please don
Part 2

I then transformed my original dash mounted horn button to an engine start button.

This too is easily done. Remove your ignition switch. Using a 12 volt test light, determine which wires on the side of the switch are hot (use a test light for this function)

Next, remove the wire located on the end of the switch. It
Post Content
×
×
×
×
Link copied to your clipboard.
×
×