Skip to main content

Arden posted:

I’ve been thinking about a SUBY like Marty’s or something like this

If that CB engine is really within your budget, you want a 2.5 Suby as installed by Carey Hines. Like the man said: 180 hp (probably a little more), same torque at something useable like 3000 rpm, and it just works

You want authenticity? Buy a Porsche; these are something else entirely and that's just that. If you're worried about weight, don't. The N/A Suby is only 40 pounds or so more than a dressed, hot-rodded VW Bug engine as cast by Autolinea, and the 20 extra pounds of radiator and hose go mostly up front, leaving you with a weight distribution that's pretty much what it was with the Type 1. I believe a Type IV engine is heavier than the Suby. 

To my lights, the only argument for putting a Type 1 in these cars involves an appeal to atavism, a love of nostalgia, a fetish for oil leaks and—perhaps—a desire to dress said engine to look rather convincingly like the P-car motor it's pretending to be. I'm that guy; I get off on that stupid oil filter can thingie the old Porsches had in back of the fan shroud.* But you?

Just your screen-shotting the turbo'd CB engine demonstrates that you give not a whit for "authentic 356 engine looks." You want power. Japanese junk yards are overflowing with it. Hear the call.

Or at least just consider what I call The Swap Test:

You will see guys swapping out Type 1 engines for Subarus. You will not see the opposite. 

=

*I am the guy who has dressed a Type 1 engine with the accoutrements of a Type 547 Four Cam, for reasons that can be neither understood nor appreciated by anyone sane. And I am also that guy who personally shoehorned a Suby mill into the restricted confines of a TD replica engine bay, where nigh God nor Beast ever intended it to be. So you can see I swing both ways, in swapping terms. 

Last edited by edsnova

 

Sacto Mitch posted:

 

“It’s not a modern car, never will be...”

...I guess it helps, going in, if you’re old enough to remember when starting a car in the cold was a diplomatic conversation between man and machine... 

 

 

 Well, wouldn't you know if those lovable Canadians from Cold War Motors didn't up and post this proof of concept for me:

 

 

Last edited by Sacto Mitch

You know it's cold when you have to shovel coals/embers from a burning fire under your '57 bug for 4 hours before the oil will flow enough to let the 6 volt system turn the 36hp putt putt over. That's what I get for driving from the coast to the interior to visit a friend for New Years and not realizing the effects of the temperature difference (what can I say, I was a much younger man).  Damn 20w-50!!!

Post Content
×
×
×
×
Link copied to your clipboard.
×
×