Skip to main content

Replies sorted oldest to newest

A 1641 with stock dual port heads and dual carbs will make 70-75 horsepower and still be fun to drive. You may find that after getting familiar with the car it could leave you wanting more or you could be perfectly happy with the car the way it is. If your happy with the price of the car you're looking at then drive it the way it is; you could always update at a later time. It's part of what we call 'The Madness', and we're really good at helping you with things like this.  Of course, more hp means better brakes, and maybe a little wider wheels/tires so it handles better, and maybe a 5 speed...

Thanks Robert, but I already have my eye on a car, and I plan on buying it before the end of the week. Just wondering if the engine is going to be something I'll regret later on since I haven't driven other cars. Is the 1600cc engine too slow or given the lightweight fiberglass body, 75 hp is going to good enough to enjoy on a summer day.

@ALB posted:

A 1641 with stock dual port heads and dual carbs will make 70-75 horsepower and still be fun to drive. You may find that after getting familiar with the car it could leave you wanting more or you could be perfectly happy with the car the way it is. If your happy with the price of the car you're looking at then drive it the way it is; you could always update at a later time. It's part of what we call 'The Madness', and we're really good at helping you with things like this.  Of course, more hp means better brakes, and maybe a little wider wheels/tires so it handles better, and maybe a 5 speed...

Thanks for the response! It's basically a brand new replica (less than 200 miles), I love the color, but it's unclear who built the car. The guy thinks its Intermeccanica, but can't confirm. He's asking $30k for it.  Doesn't come with a top or any windows. Built in early 2000's on a 1965 VW chassis. 

Be Careful. This info and the price don't jive. If it was built a long time ago and only has 200 ,miles on it I find that to be a red flag. Why wasn't the car driven in all that time? usually because it doesn't drive very well. The 30K price will buy you a very nice well sorted Speedster with the top and side curtains. Look at the classified section on this forum. The forum moderator has a Intermeccanica for sale at about the same price and it is a very nice car. Check some out. Lurk on the site, get to know what's what, and you will be better off for it. Welcome to the madness!

@Jimmy V. posted:

Be Careful. This info and the price don't jive. If it was built a long time ago and only has 200 ,miles on it I find that to be a red flag. Why wasn't the car driven in all that time? usually because it doesn't drive very well. The 30K price will buy you a very nice well sorted Speedster with the top and side curtains. Look at the classified section on this forum. The forum moderator has a Intermeccanica for sale at about the same price and it is a very nice car. Check some out. Lurk on the site, get to know what's what, and you will be better off for it. Welcome to the madness!

Thanks! Apparently the cars been in a wine cave and not driven since purchase. I’m having a PPI conducted in the morning to check it out - let’s see what comes of that! I saw the one on sale - don’t want a red car. 

It has a 69mm crank with 87 mm P&C - so 1641 cc.  That extra 1 cc counts.

Check the hinges for the front hood and rear engine lid.  If it is an IM,  they will have INTERMECCANICA stamped (raised casting) in them -- if they are plain then it is a CMC/FF. A top and windows will cost $1k. Built in early 2000's on a 1965 VW chassis with only 200 miles - sounds more like a CMC.  I have one sitting in my wine cave! Also check to see if painted or OEM CMC gel coat.

I'd think 70-75 HP would be wishful thinking over the stock 1584 cc 50 hp engine (69 x 85.5) - referred to as a 1600.  It would need some good heads, cam and exhaust.  Even fiberglass, it still weighs 1800 pounds.

intermechanica hinges

Attachments

Images (1)
  • intermechanica hinges
Last edited by WOLFGANG

How is it registered?  What does the title say? has it been registered in Cal. ? Have you checked on the possibility of getting it on the road without flaming hoops?  1965 has a link pin front end.  If you plan to drive on freeways you may want taller gears in a 1641.  Had one , they will get you down the road but not with a lot of gusto.  Drive the car.

I would love to see you buy it and be happy, but none of us want you to get scrod.

Please let us know how it goes. We're pullin' for ya.

Thanks for all the amazing replies! Wish I came here sooner. Since I got some private messages asking for the car listing, here it is:

 https://www.desertprivatecolle...TER-REPLICA-1965-VW/

I'm open to hear your thoughts. If you think I should pass on this car, I will, as I'm not much of a car guy, and don't want to get screwed! I'll eat the $150 spent on the PPI I'm getting done tomorrow morning.

It's currently registered in AZ, but the dealer said he can register it here in CA as a 1965 VW.

The motor looks a little rough for only 200 miles and I wasn't able to see the "Intermeccanica" name on the engine lid hinges. There also seems to be something going on with the passenger door card/fit and the door handle is missing. I'm also not familiar with those gauges being used in the car, they look more like 914 gauges and I don't know if IM used those or not. The car does have 10 slot rims which are nice but it is still a four lug rim based on the hubcaps. Overall the car looks clean and needs a good polish and the chrome bits cleaned up.

IMHO it isn't a $30K car though. Closer to a $24-$25K car without the top and the smaller single carb motor.

The car is worth what you want to pay for it. That being said, I'd agree with Robert. It looks more like a $24K car. I've got an older Intermeccanica and the chrome carpet trim looks different and the front yellow beehive lights look a little wrong. The color is nice, but I suspect you could either do better or pay less. In any event, it's clear you've already caught the madness and you should plan on spending a lot of time on this forum. Welcome!

Mike

@Stan Galat posted:

Pretty car.

The heart wants what the heart wants

Stan's got it right. If you want it, go ahead and plan on spending some time and money changing it until it's the car you really want. Engine too small, no problem... Not an Intermeccanica, no problem. No rock chips on the front bumpers, no problem. Need to install a top, no problem. Oops, bought the wrong car, no problem.

A lot of these beasts were kit cars so there's a lot of expertise here on how to solve almost any problem or how to make changes to personalize your ride. The key to having the coolest car is to make yourself happy. Forget what other people think. It's not their car!

That being said, I've had 5 or 6 people honk, wave or yell cool car at me today. It's hard to mess up these little plastic treasures as hard as I try :-)

I'd do a lot more shopping before I would buy that car.  A 1640 engine will soon get you completely frustrated with the lack of power.  I made the same mistake with my first speedster buy, which I sold the same summer I bought it.

You state that you are not much of a car guy, and I think that is obvious.  You are caught up in the romance and dream of a sweet little two seater sports car that looks lovely in pictures.  I think you have bought the seller's pitch completely, as so many other first time speedster buyers have done, and as so many have subsequently regretted their impulsive purchase.  I did the same years ago.

It's clear you are chasing this car based on emotion, not on logic.  I am not recommending you buy the 'red car' that is advertised on this site, but for the same amount of money, this 'red car' is three times the car.  Anyone being rational, and not being caught up in the dream of speedster ownership, would do a straight forward comparison, and would come to a rational decision that for the same amount of money you want to spend on this incomplete speedster, you could buy a much better vehicle.  

You need to slow down, do some rational thinking, and a lot more shopping, before you end up with a less than fully useful speedster that you will soon realize is not what you really want.

I agree with Bob.  Take a deep breath, slow down, and look at (and drive?) some before you jump at the first one.  I think this particular car is overpriced, particularly when compared to others like David Bayne's red car.  His may not be the style you want, but use the quality and features as a benchmark for comparison.  You'll be much happier if you wait a bit.

That said, "Welcome to the Madness!"

Here's some issues with the engine compartment-

No hood release cable - so lid must flop up and down (assume no pin on hood to secure)

No shroud to heater boxes hoses nor are the openings blocked off - allow escape of cooling air and heated exhaust air into engine compartment

Gaps in cooling tins - can see asphalt

Engine tin around intake pre-heat hacked (cut) up

 

See the source image

Attachments

Images (1)
  • mceclip0

@RayRay19, I have a couple of suggestions.  Get in touch with Troy Sloan (on this site) and Alan Merklin (also here) as both of them buy, improve, and resell used Speedsters.  They can be on the look out for just exactly what you want, or they can change one into it.  Also check with the folks at Special Edition/Beck (www.beckspeedster.com) as they often get used Becks in, refurbish them, and resell.  That's how I sold mine some months ago.  All of the folks named in this post can provide you with a top quality car at a fair price, and can be trusted to take care of you.

@RayRay19, I have a couple of suggestions.  Get in touch with Troy Sloan (on this site) and Alan Merklin (also here) as both of them buy, improve, and resell used Speedsters.  They can be on the look out for just exactly what you want, or they can change one into it.  Also check with the folks at Special Edition/Beck (www.beckspeedster.com) as they often get used Becks in, refurbish them, and resell.  That's how I sold mine some months ago.  All of the folks named in this post can provide you with a top quality car at a fair price, and can be trusted to take care of you.

Thanks @Lane Anderson!

@Alan Merklin - Please let me know if you have anything available coming up!

@RayRay19 posted:

Update: there is actually an IM badge on the hinge of the car. PPI showed some stuff that needs fixing (door handle Broken, needs new tires, small oil leak) , but he said the car is in generally good shape. 

Now that this is on the hinge, does that change anything?

I own an Intermeccanica, which I ordered as a coach in 2005. I know what they are all about, but they became something different when they went to the proprietary frame.

Does it change everything to find "Intermeccanica" stamped on the hinge of this car? There was a guy from Australia on here recently who thought it did. He told us he had a vehicle of historical significance, and wanted to obtain a "Certificate of Authenticity" for his replica.

Personally, I'm not convinced it increases the value of the car all that much. It's still a pan based car, without a top or side curtains, with a very small engine and a stock 4-speed. It presents well. If you like it, and you think it's worth $30k, then buy it and be happy.

What we think doesn't have very much relevance here. I suspect you didn't marry your wife because your friends liked her. This is kind of like that.

You clearly want this car. A thing is worth what the buyer and seller agree it is. We've expressed our opinions regarding the value of the car, relative to what others have been selling for. But if you want this one, and are looking for a reason to pull the trigger-- that stamp on the hinge is as good as anything.

I can't give you any more affirmation than that.

Last edited by Stan Galat

@Stan Galat Thanks for your valuable input. After speaking to the guys at IM directly, I learned that this car was probably built in 1980, and that CMC used leftover IM hinges when they took over the business. So you guys were right - it is most likely a CMC car, 15% chance it’s an IM  

As for this being like choosing your wife, I beg to differ. I dated many girls before I met my wife and I knew what I was looking for and what was right for me. On the other hand I’ve never bought a classic car, let alone a replica. also, I bet you didn’t join a website to talk about your wife and her parts, what she looks like compared to other wives, and if you should sell her with other people.

 I’m here to learn and ask questions, and over the past two days I’ve learned a lot from all of you. It has been very valuable and an interesting experience. I wasn’t looking for anyone to affirm as to whether or not they liked the car, but rather, if it was a good buy, or if I was getting screwed. Actually, this all started out with whether or not a 1641cc engine was fast enough  

I will not be offering to buy this car for $30k, and I have this forum to thank. I appreciate it. I look forward to finding the right car soon.  

I never heard of CMC using IM hinges but mine is a 1988 kit --- so no id at all on hinges.   Indeed CMC did buy up IM Speedster molds, tooling and guess other stuff in 1979.  The Manf Id that IM put on passengers side door frame was just a a foil sticker that often get removed during a repainting.  The 200 miles is very unusual if IM built it in 1980.  It isn't unusual for a CMC to site for years unfinished - still some in crates.  Not sure how one imports a CMC kit into Canada though.  Wonder what the title says and where the '65 VW chassis came from.  Sure is a mystery!

Manufacturer ID Plate | SpeedsterOwners.com - 356 Speedsters, 550 ... 356 Intermeccanica - Pelican Parts Forums

Attachments

Images (2)
  • blobid0
  • blobid1
@WOLFGANG posted:

I never heard of CMC using IM hinges but mine is a 1988 kit --- so no id at all on hinges.   Indeed CMC did buy up IM Speedster molds, tooling and guess other stuff in 1979.  The Manf Id that IM put on passengers side door frame was just a a foil sticker that often get removed during a repainting.  The 200 miles is very unusual if IM built it in 1980.  It isn't unusual for a CMC to site for years unfinished - still some in crates.  Not sure how one imports a CMC kit into Canada though.  Wonder what the title says and where the '65 VW chassis came from.  Sure is a mystery!

Manufacturer ID Plate | SpeedsterOwners.com - 356 Speedsters, 550 ... 356 Intermeccanica - Pelican Parts Forums

A very interesting mystery. Just to note, here is what I got from IM:

 

Robert Ruskey of Intermeccanica here. I’ll be taking this inquiry over from Henry.

 

Thanks for the photo of the hood hinges. Yes, the car is highly likely to be an Intermeccanica built in Santa Ana, CA between the years 1976-80.

 

The reason I can’t say absolutely for certain just yet is that there were a few in the later years that ‘snuck by’ as Intermeccanica’s with these

hinges after the company tooling was sold to CMC back around 1980-81.

 

@WNGD posted:

Weird question but considering how perfect/new the nut holding the lid hinge is, is it possible the hinges were somehow bought and added to this non IM later/recently? 

I don't care how many miles are on the car, these should look older

Great question - apparently the car wasn't driven much and was sitting in a wine cave. I was wrong - the car has 2300 miles, not 200. That's why it's so clean.

 

@RayRay19, as you can see from the above posts we do have a tendency to go off on tangents (it's called thread drift), which can fluster those who are new to this group.  Before too long we'll be talking about Marty's leather gloves, car-themed watches, espresso, and who knows what.  It's among our many endearing traits.

Assuming the world has returned to some semblance of normalcy in August, please join us in Carlisle, PA.  You'll have a great time with some crazy (in a good way) folks and you'll be able to see and compare various cars of all price levels from all of the manufacturers.  You'll probably get to drive some as well.  I did that back in '05 after lurking here for a number of months, and I made many new friends before I ever got a car, which was actually assembled at the '06 Carlisle show by those same friends.

Joining us at Carlisle would be the absolute best way to do research, and you'd have a great time.

The wine cave story makes me think somebody liked how it looked more than how it drove. Very cool conversation piece and likely not the only cool car owned by this owner?

I agree that $30k is high for this particular one but $20k might be reasonable.

I'd think $18-18,5 would be close to right. Buy it for that, go through all the electrics, hydraulics and mechanicals, then Subaruify it for a really nice "resto-mod" of an actually old car. 

It has been done.

But if the seller's not motivated, plenty of other fish in the sea—especially at your stated budget.

Good luck with your search, RayRay.

The car was kept in a wine cave? Very romantic, James Bond kind of story. I guess it could be true, but does that mean he kept his Boone's Farm in the garage?

Having a 2110 stroker with dual Dell 40's, I can't imagine being happy with much less of a power train, but lots of guys are perfectly happy with a 1915. To each his own. i couldn't recommend a anything in the 1600 range. I've driven several and they just don't deliver much "oomph", and I'm not one to push my car real hard.

Post Content
×
×
×
×
Link copied to your clipboard.
×
×